Vivax ACP-12CC35AERIs R32 User Manual page 141

ENG
FUNCTION BUTTONS
Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the How to Use the
Basic/Advance Functions section of this manual.
NOTE Please do not select HEAT mode if the machine you purchased is cooling only
type. Heat mode is not supported by the cooling only appliance.
.
ON / OFF
Turns the unit on or off
TEMP
Increases temperature in
1°C (1°F) increments. Max.
temperature is 30°C (86°F).
NOTE: Press together
buttons at the same time for 3
seconds will alternate the
temperature display between the
°C & °F.
SET
Scrolls through operation
functions as follows: Active
clean( ), Fresh( ),
Sleep( )Follow Me(
AP mode ( )
TEMP
Decreases temperature in
O O
1 C(1 F) increments. Min.
O
temperature is 16 C(60
FAN
Selects fan speeds in the
following order: AU% -> 20%
40% 60% 80%
Press the TEMP or
to increase/decrease the fan
speed in 1% increments.
SWING
Starts and stops vertical
louver movement.
&
)
O
F).
100%.
button
Model: RG10N2 (D2S)/BGEF
TURBO
Enables unit to reach preset
temperature in shortest
possible time. feature.
VIVAX
MODE
Scrolls through operation
modes as follows: AUTO
COOL DRY HEAT FAN
HEAT mode is not supported by the
cooling only appliance.
CO/GEAR
Press this button to enter
the energy efficient mode
in a sequence of following:
ECO GEAR(75%)
GEAR(50%) Previous
setting mode ECO
OK
Used to confirm the
selected functions
TIMER
Set timer to turn unit on off
BREEZE AWAY
This feature avoids direct
air flow blowing on the
body and makes you feel
indulging in silky coolness.
VANE
Press to enter the louver
setting mode.
LED
Turns indoor unit's LED
display and air conditioner
buzzer on and off (model
dependent), which create a
comfortable and quiet
environment.
RG10N2 (D2S)/BGEFU1
NOTE: