Vivax ACP-12CC35AERIs R32 User Manual page 157

VIVAX
Room temperature sensor selection
Follow me ptc
Press the Follow me/PTC button to select whether
the room temperature is detected at the indoor unit
or the wire controller.
When the Follow me function indication
at the wire controller.
PTC function (on some models)
Press the Follow me/PTC button for 2 seconds or more to activate the PTC
function,when the unit is under the Heat mode.
Press the buttons again for 2 seconds or more to deactivate the PTC function.
Follow me
When the PTC function is activated,the
ptc
all the models)
Child lock function
°C & °F scale selection (on some models)
Faceplate function (on some models)
1.When the unit is off, Press the Mode(A/B) button long to activate the
faceplate function.The
The F2 mark appears when the
faceplate is adjusted.
Press and hold "+" and "-" buttons together for 3 seconds or more to
activate the child lock function and lock all buttons on the wire
controller. Press the buttons again for 3 seconds or more to
deactivate the child lock function.
When the child lock function is activated, the
Press and hold buttons together for 3 seconds will alternate the
temperature display between the ℃&℉ scale.
appears,the room temperature is detected
mark appears. (Not applicable to
mark will flash.
Indoor unit
mark appears
ENG