Vivax ACP-12CC35AERIs R32 User Manual page 153

VIVAX
Some units
Active clean function(
(some units) :
The Active Clean Technology washes
away dust, mold, and grease that may
cause odors when it adheres to the
heat exchanger by automatically
freezing and then rapidly thawing the
frost. When this function is turned on,
the indoor unit display window
appears "CL", after 20 to 45
minutes, the unit will turn off
automatically and cancel CLEAN
function.
FRESH function (
When the FRESH function is initiated,
the ion generator is energized and will
help to purify the air in the room.
Sleep function(
The SLEEP function is used to
decrease energy use while you
sleep (and don't need the same
temperature settings to stay
comfortable). This function can only
be activated via remote control.
For the detail, see sleep operation in
"USER'S MANUAL"
Note: The SLEEP function is not
available in FAN or DRY mode
)
) (some units):
) :
Follow me function(
The FOLLOW ME function enables
the remote control to measure the
temperature at its current location
and send this signal to the air
conditioner every 3 minutes interval.
When using AUTO, COOL or HEAT
modes, measuring ambient
temperature from the remote
control(instead of from the indoor
unit itself) will enable the air
conditioner to optimize the
temperature around you and ensure
maximum comfort.
NOTE: Press and hold Turbo button
for seven seconds to start/stop
memory feature of Follow Me
function.
 If the memory feature is
activated,"On"
displays for 3 seconds on the
screen.
 If the memory feature is
stopped,"OF "
displays for 3 seconds on the
screen.
 While the memory feature is
activated, press the ON/OFF
button, shift the mode or power
failure will not cancel the
Follow me function.
AP function( )(some units)
Choose AP mode to do wireless
network configuration. For some
units, it doesn't work by pressing the
SET button. To enter the AP mode,
continuously press the LED button
seven times in 10 seconds.
ENG
):