Table Of Contents - Maico ER-UP Mounting And Operating Instructions

Table of contents

Equipment overview (Figure 1)
ER-UP/G with plastic shutter without fire
protection equipment
1 Plastic backflow preventer (Fig. of instal-
lation position with air outlet to the right)
2 Plastic exhaust socket
ER-UPD with fire protection shut-off
device and
ER-UPB with fire protection shut-off
device and fire protection cover
3 Metal shut-off shutter with trigger
equipment
4 Soldered strut
5 Metal exhaust socket
5.1 Metal connection socket Ø 75/80
for second room extraction ER-UPB
ER-ZR second room connection set
6 Protective grille
7 Filter mat, filter class G2
8 Adaptor
9 Suction duct, ZR connection (not included
in ER-ZR set)
10 Plastic installation socket for second room
extraction
ER 60/100 fan insert
11 Fan insert
12 Electronic circuit boards
13 Housing floor seal
14 Sensor (H or F model)
15 Cover with central screw
16 Regulating plate for second room connection
17 Filter mat, filter class G2
P production date
S1 wiring diagram
S2 rating plate
S3 TÜV sticker
ER-AS (special accessories)
Extraction socket for WC seat ventilation Ø 70
Acknowledgements: © Maico Elektroapparate-Fabrik GmbH.
Translation of original operating instructions We cannot be held
responsible for mistakes or printing errors and retain the right to
make technical modifications without giving prior notice. The
brands, brand names and protected trade marks that are
referred to in this document refer to their owners or their
products.
2
Table of contents
1. General notes .......................................... 3
2. Specialist installer qualification ................. 3
3. Intended use............................................. 3
4. Non-intended use ..................................... 3
5. Safety instructions .................................... 4
6. Operating the fan ..................................... 7
7. Product information .................................. 7
7.1 Certificates of approval ..................... 7
7.2 Installation conditions ........................ 7
7.3 Permitted exhaust air systems .......... 8
7.4 Combination options ......................... 8
8. Environmental conditions/operating limits .. 12
8.1 Regulations for operation with
fireplaces......................................... 12
9. Technical data ........................................ 12
10. Storage ................................................ 12
11. Installation preparations ....................... 13
11.1 Requirements in line with approval . 13
11.2 Preparations for wall installation .... 15
11.3 Ceiling installation preparations .... 16
11.4 Preparations for electrical connection . 18
11.5 Preparing the shut-off device/shutter .. 19
12. Housing installation .............................. 21
12.1 Installing ER-UP/G housing ........... 21
12.2 Installation of ER-UPD housing ..... 26
12.3 Installation of ER-UPB housing ..... 29
13. Electrical connection ............................ 32
14. Installation of fan insert and cover ........ 34
14.1 Settings on electronic circuit boards ..... 34
14.2 Installing fan insert/exhaust air
element ......................................... 35
14.3 Installing the cover ........................ 37
15. Commissioning .................................... 37
16. Cleaning, maintenance ........................ 38
16.1 Filter change ................................. 38
16.2 Filter change, second room ........... 39
16.3 Removing fan insert ...................... 39
17. Extraction socket/WC odour extraction 40
18. Fault rectification .................................. 41
19. Spare parts .......................................... 42
20. Dismantling .......................................... 42
21. Environmentally responsible disposal .. 42
22. Wiring diagrams ................................... 43