Table of Contents
Advertisement
32. Choose item and press the EDIT soft key. Choose appropriate setting and then press
the ENTER soft key. Refer to the table and sentence description on the next page for
details.
33. Press the NEXT key, and the DATA3 (PC/NMEA/EXT BUZZ) port setup menu appears.
Set up this port similar to how you set up the DATA1 port.
NMEA OUTPUT FORMAT
NMEA Ver 2.0
BAUD RATE
4800bps
BIT LENGTH
8 bits
STOP BIT
1 bit
PARITY
NONE
(Control: Xon/Xoff)
Installation wizard, DATA3 (PC/NMEA/EXT BUZZ) port setup menu
Item
Output Format
Selects NMEA output version for
(DATA1 port),
the equipment connected.
NMEA Output
Format (DATA3
port)
Choose baud rate of equipment
Baud Rate
connected.
Lat/Lon Format
Selects latitude/longitude format to
output.
XTE Format
Selects number of XTE digits to
output.
Output
Selects whether to output route
Destination
(data sentence RTE) and waypoint
data (data sentence WPL) when
destination is set.
Bit Length
Choose bit length of equipment
connected.
Stop Bit
Choose stop bit of equipment
connected.
Choose parity of equipment
Parity
connected.
PORT MNITR
Use this key to view which sentences are being output. See the example on
(soft key)
then next page
1
*
Auto detection of baud rate of connected equipment. For use only with device having
"AUTO" feature.
2
*
Choose 38400 bps when connecting an AIS Interface or AIS Transponder to the DATA1
port.
Description of items in "port" menus
Description
31
Settings
NMEA0183 Ver. 1.5,
NMEA0183 Ver. 2.0
DATA1 port:
1
AUTO*
, 4800 and
2
38400*
(bps)
DATA3 port: 4800,
9600, 19200 (bps)
DD°MM.MM',
DD°MM.MMM',
DD°MM.MMMM'
X. XX,
X. XXX
Yes, No
7, 8 (bits)
1, 2 (bits)
Even, Odd, None
Default Setting
NMEA0183 Ver.
2.0
4800
DD°MM.MMM'
X. XX
No
7 bits
1 bit
None
Advertisement
Table of Contents
