3.2 Activating the Camera
You are required to activate the camera first by setting a strong
password for it before you can use the camera.
Activation via Web Browser, Activation via Grundig IP-Finder, and
Activation via Client Software are all supported. We will take
activation via Grundig IP-Finder software and Activation via Web
Browser as examples to introduce the camera activation.
Note:
Refer to the User manual for Activation via Client Software.
Steps:
Notes:
The default IP address of the camera is 192.168.1.100.
⚫
The computer and the camera should belong to the same
⚫
subnet.
For the camera enables the DHCP by default, you need to use
⚫
the Grundig IP-Finder software to search the IP address.
Connecting via a Switch or a Router
3.2.1 Activation via Web Browser
1. Power on the camera. Connect the camera to
your computer or the switch/router which
your computer connects to.
2. Input the IP address into the address bar of the
web browser, and press Enter to enter the
activation interface.
14