Kyocera FAX System 12 Operation Manual page 230

Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings Transmission
Reception
E-mail Send
Settings
*1 When Direct SMTP is used, this must always be set.
*2 When Internet FAX is used, this must always be set.
After completing the settings, click [Submit] to save the settings.
Item
Transmission Type
Direct SMTP Sender
*1
Address
Direct SMTP Port
Number
Direct SMTP Timeout
Direct SMTP Port
Number
Direct SMTP Timeout
E-mail Size Limit
Sender Address
Signature
Function Default
Allows to choose a method of sending from [Specify
for Each Destination], [Via server - On], and [Via
server - Off (Direct SMTP)].
Displays the sender address used for E-mails sent
by Direct SMTP from this machine.
Enter the port number used by Direct SMTP.
Normally, 25 is used.
Sets the timeout time in seconds during which this
device retries to connect to the SMTP server.
Enter the port number used by Direct SMTP.
Normally, 25 is used.
Sets the timeout time in seconds during which this
device retries to connect to the SMTP server.
Enter the maximum size of E-mail that can be sent in
Kilobytes. When the value is 0, the limitation for E-
mail size is disabled.
*2
Displays the sender address used for E-mails sent
from this machine. Set in [E-mail Address] in POP3
User Settings.
Displays the signature to be inserted in the end of the
E-mail body. Set on the [E-mail Settings] page.
The default settings can be changed in [Common/
Job Default Settings] page.
10-10
Description