Kyocera FAX System 12 Operation Manual page 226

Internet Faxing (i-FAX) > i-FAX Settings
3
Enter the user name and password of the administrator, and click Login.
Setting Administrator User Name, and Password restricts general users' access to pages
other than the Start page. For security purposes, setting the Administrator password is
highly recommended. The factory default setting for the default user with administrator
privileges is shown below. (Upper case and lower case letters are distinguished (case
sensitive).)
Login User Name: Admin
Login Password: xxxxxxxxxx (Serial Number)
The equipment's serial number is printed in the location shown in the figure.
4
Click 'Function Settings' from the navigation bar on the left to view and set values for that
particular category.
5
Click 'FAX / i-FAX'.
The Transmit Settings dialog box will appear.
Command Center RX User Guide
10-6