Ups Configuration - Seenergy SVR- 632 User Manual

SVR-­‐632 U ser's M anual 223

UPS Configuration

To enable local UPS support (NVR acting as UPS
server):
1. Connect the compatible USB UPS to the NVR
2. Turn on the NVR
3. Go to "NVR Setup" >> "UPS", and check "Enable UPS Support"
option.
You can adjust how long the UPS stays on to provide backup electricity
to the NVR after a power failure by choosing one of the options from
the drop-down shown below:
* Currently only APC Smart-UPS 750 is supported (05282012)