Seenergy SVR- 632 User Manual page 112

112 SVR-­‐632 U ser's M anual
There are two types of fps settings here, one is the fps that NVR sets
back to the camera, and this is the fps NVR will be receiving from the
camera. The other is recording fps, which will be limited by the live
fps. (ex. if the live fps is set to 10, choosing "Full" in the recording fps
meaning it will only record at 10fps maximum.
For MPEG/H.264, only i frame or full (i+p frame) can be selected for
recording fps.
For single stream camera, only the recording fps can be adjusted.