Smtp Servers - Seenergy SVR- 632 User Manual

SVR-­‐632 U ser's M anual 215

SMTP Servers

1. Enter the hostname or the IP address of the SMTP server 2. Enter
the port of the SMTP server
3. Specify the sender's name in the "Sender's name" field 4. Enter the
sender's e-mail address
5. Check "Enable Authentication" and enter the username and
password of the SMTP server if it requires authentication
6. Click "Apply" to save the configuration
*The NVR supports SMTP servers that use base64 or MD5
authentication methods.
We have finished defining how an event will be triggered and which
servers will be receiving notifications in the previous two sections, now
we can finish up the event configuration by setting:
•Which channels will have event trigger function enabled