Seenergy SVR- 632 User Manual page 128

128 SVR-­‐632 U ser's M anual
1. For cameras that come with physical digital input ports, their ports
will be listed in the far left drop-down menu.
2. Pick the desired channel for I/O mapping, and then select the
camera's input port from the drop-down menu.
3. Select the trigger condition from the "Condition" drop-down menu.
*The recorder does not control camera's input or output ports in a way
to let you pair recorder itself with a camera's input or output port for
event receiving or triggering.
*The recorder only acts as a medium for pairing up input/output ports
between cameras and the recorder.
*Only connected cameras will be displayed in the list.
*Some cameras only allow one trigger source be configured at a time,
e.g.:
if the camera has the motion detection function turned on, its digital
input will be disabled and vice versa. Under such circumstance, if you
set to use camera's digital input port as the event trigger source, you
will not be able to select motion detection as the trigger source for this
camera under "Event Configurations" >> "Event Trigger" setup page.
• The image(s) that are uploaded to the destined FTP server or
emailed to a destined mail recipient are in their own proprietary
image file format (.h4i or .p4i), which can only be opened by the
NVR media player.
• .h4i if event was recorded in H.264, .p4i if event was
recorded in MPEG4. .jpg if event was recorded in MJPEG.