Table of Contents
Advertisement
Description
3.1
Area of application
The rotating electrical motors of this series are used as industrial drives. They are designed for
a wide range of drive applications both for line operation as well as in conjunction with
frequency converters. They are characterized by their high power density, extreme
robustness, long service life and outstanding reliability.
Correct and intended use of the motors
These motors are intended for industrial installations. They comply with the harmonized
standards of the series EN / IEC 60034 (VDE 0530). It is prohibited to use these motors in
hazardous zones if the marking on the motor rating plate does not explicitly permit line or
converter operation. If other/more wide-ranging demands (e.g. protection so that they
cannot be touched by children) are made in special cases – i.e. use in non-industrial
installations – these conditions must be ensured by the customer.
Note
Motor directive
Low-voltage motors are components designed for installation in machines in accordance with
the current Machinery Directive. Commissioning is prohibited until it has been absolutely
identified that the end product is in conformance with this Directive. Comply with standard
EN / IEC 60204-1.
Use of motors without CE marking
Motors without CE marking are intended for operation outside the European Economic Area
(EEA). Do not use any motors without a CE marking in the EEA!
Use of machines without EAC marking
EAC machines are appropriately marked on the rating plate, and are intended for operation
within the Eurasian customs union.
Within the Eurasian customs union, do not use machines without the appropriate EAC
marking.
1LE8 轴高 80 ... 355
操作说明, 11/2022, A5E52373573A
WARNING
Risk of explosion
This motor is not designed for use in hazardous areas. An explosion can occur if the motor is
operated in these areas. This can result in death, serious injury, or material damage.
• Never operate this motor in hazardous areas.
3
145
Advertisement
Chapters
Table of Contents
