Start And End Two-Way Intercom - Sena NS10 User Manual

4. To reject a call, press the Center Button for 2 seconds until you hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad and make a call. Then the call is automatically transferred to the
headset.
- In stand-by mode, press the Center Button for 3 seconds, to activate the voice dialing of your mobile phone. You
will hear a high tone single beep. Your mobile phone has to support voice dialing. Refer to your mobile phone manual
for further instruction.
- To redial the last number, press the (+) button for 3 seconds in stand-by mode. You will hear a voice prompt, "Last
number redial".
- To cancel the voice dialing or redialing last number command, tap the Center Button while it is in progress.
Mobile Phone Call Button Operations
Answer Tap the Center Button or Say "Hello"
End Press the Center Button for 2"
Reject Press the Center Button for 2"
Transfer Must be done on the mobile phone
Call Use phone keypad
Redial Press the (+) button for 3"
Voice Command Press the Center Button for 3"
If you have second mobile phone connected with the NS10 by multipoint connection, you can answer the incoming call to
the second mobile phone by tapping the Center Button while you are on the line of the first mobile phone. In this case, the
first call is on call waiting.
10. TWO-WAY INTERCOM

10.1 Start and End Two-way Intercom

1. You can start a one-on-one intercom conversation with any intercom friend by tapping the Center Button: Single
tapping to intercom with the first intercom friend, double tapping with the second intercom friend, or triple tapping with
the third intercom friend.
2. To terminate a one-on-one intercom conversation, single tap the Center Button. This will end the intercom
conversation.
1st intercom friend
Start intercom Single tap
2nd intercom friend
Double tap
13
3rd intercom friend
Triple tap
| NS10