Advertisement
REVISIONS
Revision date
*Manual number
Aug. 2015
IB(NA)-0600600-B
Oct. 2016
IB(NA)-0600600-C
Jun. 2017
IB(NA)-0600600-D
Mar. 2019
IB(NA)-0600600-E
Jun. 2020
IB(NA)-0600600-F
First edition
Added
• Start count monitor (Pr.1410, Pr.1411)
• Enhanced functions in the position command source selection (Pr.419 = 10, 100, 110, 1110)
• Enhanced auxiliary functions for position control by point tables (auxiliary function parameter setting: 2, 12, 102, 112)
• Enhanced function in the stop mode selection at communication error (Pr.502 = 4)
• Excitation current low-speed scaling factor (Pr.14 = 12 to 15, Pr.85, Pr.86, Pr.565, Pr.566, Pr.617)
• Motor induced voltage constant (Pr.1412, Pr.1413)
• Pr.1000 Direct setting selection
• Input signals (CLRN, JOGF, JOGR)
• Output signal (SAFE)
Added
• Load characteristics fault detection (Pr.1480 to Pr.1492)
• Droop control using the per-unit speed control reference frequency (Pr.288 (Pr.681) = "20 to 22")
• Torque current command limit (Pr.801, Pr.803 = "2")
• PID manipulated amount: 0 to 100% (Pr.1015 = "2, 12")
• Undervoltage level setting for the 200 V class inverter (Pr.598)
• Pr.1348 P/PI control switchover frequency
• Pr.1349 Emergency stop operation selection
• Operation selection at a communication error (Pr.502 = "11, 12")
• Multi-revolution counter monitoring
Edited
• Pr.275 setting range: 0 to 300%
Added
• Reset selection/disconnected PU detection/PU stop selection (Pr.75 = "1000 to 1003, 1014 to 1017, 1100 to 1103,
1114 to 1117")
• External fault input signal (Pr.178 to Pr.189 = "32")
• Communication reset selection/Ready bit status selection (Pr.349 = "100, 101")
• PLC function (Pr.414 = "11, 12", Pr.675)
• Position command source selection (Pr.419 = "200, 210, 300, 310, 1310")
• Pulse monitor selection (Pr.430 = "2000 to 2005, 2012, 2013, 2100 to 2105, 2112, 2113, 3000 to 3005, 3012, 3013,
3100 to 3105, 3112, 3113")
• Monitor with sign selection (Pr.1018 = "1")
• Referenced Standard (Requirement of Chinese standardized law)
• Application of caution labels
Added
• Main circuit capacitor life measurement at power OFF (every time) (Pr.259 = "11")
• Pr.506 Display estimated main circuit capacitor residual life
• Current input check terminal selection (Pr.573 = "11 to 14, 21 to 24")
• Low-speed forward rotation command (RLF) signal, Low-speed reverse rotation command (RLR) signal
• Cooling fan operation selection during the test operation (Pr.244 = "1000, 1001, 1101 to 1105")
• Pr.507 Display/reset ABC1 relay contact life, Pr.508 Display/reset ABC2 relay contact life
Edited
• Tightening torque specifications
*The manual number is given on the bottom left of the back cover.
Revision
29
Advertisement
