System Setup - Digital Watchdog VMAX A1 G4 DW-VA1G442T User Manual

3 VMAX A1 G4™ DVR

1.2 System Setup

1.2.1. Connect External Devices
Follow the diagram below to connect all necessary external devices to your DVR. Please note
that the number of ports available may differ based on the model. See the product's
specifications at the end of this manual for more information.
1.2.2. System Startup
After connecting all external devices to the DVR, power up the DVR by connecting the provided
12V power adapter to the rear panel or the recorder. The boot logo will display. Please wait until
the boot process completes.
When the system is starting, the Set Admin Password window is displayed. When you log in to your
unit for the first time, you will be asked to set up a new password. The password must be a minimum of
8 characters with at least 3 combinations of uppercase letters, lowercase letters, numbers and special
characters. Acceptable special characters are 『~ ' ! $ ^ ( ) _ - | { } [ ] ; . ? /』.
To login, right-click anywhere on the screen and enter the username and password in the popup screen.
There is only one Administrator Account configurable in the DVR. It is assigned with an unchangeable
User ID marked as 'admin'. The administrator account has full access to the DVR and its configurable
parameters and can also create new users and assign rights to the new user accounts.