Digital Watchdog VMAX A1 G4 DW-VA1G442T User Manual page 60

VMAX IP G4™
®
notifications. Check with your email service provider for SMTP server information.
•
YOUR EMAIL ACCOUNT USER NAME: Input the username or email address from which
the notifications will be sent.
•
YOUR EMAIL ADDRESS: Input the email address of the account that will be used to
send the email notifications.
•
OPTION: Set the authentication method supported by the server. There are 'None/Use
Plain Auth/No Auth' options.
•
Use SSL AUTHENTICATION. Enable this setting if the SMTP server requires SSL
authentication (e.g. Gmail, Yahoo, etc.). Check with your email service provider for more
information about authentication requirements.
•
PORT: Input the port number that will be used for email sending. Check with your email
service provider for more information on the port that is used for SMTP.
•
PASSWORD: Input the email password to the account that is being used to send the
notification emails.
•
INTERVAL: For email notification, select how frequently the system will be allowed to
send out an update email.
•
EMAIL TEST: Click to check if the settings were entered correctly. The DVR will send a
test email and inform you of the result. Depending on the email service, the SMTP server
may not send an email confirmation if the email was received.
•
Check the box next to each channel you want to receive Snapshot Notify alerts for.
Check the ALL box to get alerts for all channels.
• Select the time interval for alerts from the drop-down menu.
• Please note that email notifications must be setup to receive Snapshot Notify alerts.
RECORD > SCHEDULE should always be configured before notification settings.
NOTE
The system will not email alarm messages if these recording settings are not setup
first in the DVR's recording schedule. To receive motion and sensor email notifications,
set the SCHEDULE > RECORD, EVENT > MOTION ALARM and EVENT > SENSOR
accordingly.
56