Digital Watchdog VMAX A1 G4 DW-VA1G442T User Manual page 43

39 | VMAX A1 G4™ DVR
•
Clear time: Set the time to display text on the screen.
Data will be deleted from the screen if no new data is
entered after the set time. If it is set as "0", the data will
not be deleted (If there is a start character and the
character is input, current data will be deleted
regardless of the clear time setting).
•
Position: Designate the display position of transaction
data.
•
Font color: Select the font color which will be
displayed on the screen. It will be displayed with the
color that is shown on the SAMPLE TEXT.
•
Show: Select to display transaction data in Live mode.
•
Scroll reverse: Select to change the direction of scrolling. If it is selected, you can
scroll from the bottom to the top, the latest data is displayed on the top.
Playback Display Settings
•
Display line: Set the number of lines to display on the screen.
•
Clear time: Set the time to display text on the screen. Data will be deleted from the
screen if no new data is entered after the set time. If it is set as "0", the data will not
be deleted (If there is Start Character and the character is input, current data will be
deleted regardless of the Clear Time setting).
•
Position: Designate the display position of transaction data.
•
Font color: Select the font color which will be displayed on the screen. It will be
displayed with the color that is shown on the SAMPLE TEXT.
•
Show: Select to display transaction data in the playback mode.
•
Scroll reverse: Select to change the direction of scrolling. If it is selected, you can
scroll from the bottom to the top, the latest data is displayed on the top.
Port Setup
Open the setup screen for the communication port
•
Type: Setup the type of communication port.
o
Serial: It is for a 1-to-1 connection between the
DVR and transaction verification device without
serial mux.
o
Mux: It is for a 1-to-Multi connection between
the DVR and transaction verification device.
•
Baud rate: Set the baud rate according to the
transaction verification device.
•
Parity: Set parity according to the transaction
verification device.
•
Data bit: Set the data bit according to the
connected transaction verification device.
•
Stop bit: Set the stop bit according to the connected transaction verification device.
•
TCP/IP PORT: Set the TCP/IP port number.