Setting To Factory Presettings; Formatting The Card; S E T T I Ng 1; D E F A U L T - Sharp VE-CG40U Operation Manual

Advanced Features
Setting to Factory
Presettings
Available in w, [, ], ;, ', , or . mode
You can set the camera to the factory preset-
ting by following the steps below.
1
Turn on the camera in the desired mode.
2
Press the MENU button until the menu
screen appears.
3
Press l or m to select "Z", then press
the SET button.
4
Press l or m to select "DEFAULT",
then press the SET button.
5
Press l or m to select "YES", then
press the SET button.
• Select "NO" to cancel the procedure.
52
VE-CG40U-051-059

S E T T I NG 1

D E F A U L T

F ORMA T

A U T O P OWE R O F F
F I L E NUMB E R
R E T URN
D E F A U L T
A L L S E T T I NGS W I L L
R E T URN T O F A C T OR Y
S E T T I NG S .
O K ?
N O
Y E S
52

Formatting the card

Available in w, [, ], ;, ', , or . mode
Format any commercially available card before
using. Also, you may have to format a card that
has been used in a different camera. Be aware
that formatting a card erases all the stored
images.
Notes:
• Formatting a card erases all stored images,
including delete-protected images. Be sure to
backup important data on your computer or
other media before formatting the card.
• Do not remove the power source during
formatting, as this may cause damage to the
card. It is recommended that you use the AC
outlet for the power supply when formatting.
1
Turn on the camera in the desired mode.
2
Press the MENU button until the menu
screen appears.
3
Press l or m to select "Z", then press
the SET button.
4
Press l or m to select "FORMAT", then
press the SET button.
S E T T I NG 1
D E F A U L T
F ORMA T
AU T O
F I L E NUMB E R
R E T URN
5
Press l or m to select "YES", then
press the SET button.
A L L
D E L E T E D !
O K ?
• Select "NO" to cancel card format.
6
Press the MENU button to turn off the
menu screen.
Note:
• The supplied card is preformatted for immediate
use.
02.8.27, 7:34 PM
P OWE R O F F
F ORMA T
I MA G E S W I L L B E
N O
Y E S