Installing The Software - Sharp VE-CG40U Operation Manual

Installing the software

Before you start transferring data, install the
Quick File Transfer Software included in the
supplied CD-ROM. (Refer to the Installation
Guide for details.)
Transferring the data
To transfer all the data to your PC at one time,
simply press the ! button after making the
necessary preparations.
1
Press the MENU button to display the
menu screen.
2
Press l or m to select "~", then
press the SET button.
3
Press l or m to select "PC CON-
NECT", then press the SET button.
4
Make sure the PC CONNECT menu is
set to ON, then press the SET button.
P C C O N N E C T
OU T
• If you select OFF, double-click the "My
Computer" icon and choose
"Removable Disk" in the window. See
Image Folders and File Names.
5
Press the MENU button to turn off the
menu screen.
6
Press the ! (data transfer)
button.
• Transfer indicator moves, and
all images, sound and related
data on the card will
automatically transfer to the
PC.
Note:
• Refer to the PDF manual of the Quick File
Transfer Software for details.
VE-CG40U-051-059
S E T T I NG 2
P C C O NN E C T
L A NGU A G E O F F
V I D E O OU T ON
U ND O L A S T I MA G E
S P E A K E R
B E E P
R E T URN
O F F
ON
59
Image Folders and File Names
If you select OFF in step 4 on page 58, you will
find a new drive called "Removable Disk (F:)"
(or other drive letter, depending on your PC
configuration). Image, sound and related data
are stored in files and on a card as shown
below.
Folder of still image files
DCIM
• • • • • •
100SHARP
PICS0001.WAV
PICT0001.JPG
PICT0002.JPG
PICT0003.AVI
Caution on transferring data
While transferring data, the transfer indicator
moves. Do not execute the operations below.
• Disconnect the USB cable
• Turn the power on/off
• Turn off the PC or setting it to Standby
• Open the card slot cover
You cannot transfer data when;
• The card is full.
• The card is write-protected.
Delete a few unneeded images or shift the
write protect switch to the unlocked position
and try transferring again.
Note:
• In case of data transfer error, disconnect the
USB cable, then connect it again, or turn the
power off, then turn it on again.
02.8.27, 7:34 PM
Sub-folder of still
images
Serial number
(100 to 999)
Audio data
Still images
Motion image
59