Using The Flash; Using Macro Shot - Sharp VE-CG40U Operation Manual

Basic Operations
Capturing

Using the Flash

Available in [, ], ;, ', , or . mode
You can use the flash to record good-quality
still images even in dark locations.
Types
s: Automatic flash mode, based on light
condition
N: Automatic flash mode with red-eye
reduction
q: Flash on mode
L: Flash on mode with red-eye reduction
M: Flash off mode
"q" button
1
Turn on the camera in the desired mode.
2
Press the q button until the desired
flash mode displays.
• Each time you press the q button, the
flash mode icon changes as shown
below .
3
Capture the still image (see page 13).
• The flash works depending on the
setting.
Notes:
• s and N are not available in Manual Exposure
Control mode (,), Aperture Priority mode (;) and
Shutter Speed Priority mode (').
• q and qN are not available in Auto mode
([).
• Flash is automatically set to off when using
Continuous, Auto Bracket and Auto Gamma
modes.
• The flash sensor on the front of the body
measures the light level to emit. Do not obstruct
16
it with your finger when holding camera.
VE-CG40U-013-016

Using Macro Shot

Available in [, ], ;, ', ,, . or = mode
This camera lets you shoot close-ups to focus
on subjects from about 3.5 to 28 inches (9 to
70 cm) away with the Power zoon "W" button
set to widest angle, and 8 to 28 inches (20 to
70 cm) away with the Power zoon "W" button
set to other than the widest angle. Excellent for
photographing insects and flowers.
1
Turn on the camera in the desired mode.
2
Press the Power Zoom "W" button to set
to widest angle, then press the % button.
3
Move the camera closer to the subject
until you obtain the desired angle of
view, then capture the image.
Notes:
• When you capture a macro shot, make sure that
the subject receives sufficient illumination.
• In Scene Select mode (.), this function will
only work if you select "BLACK&WHITE" from the
"SCENE MENU".
• Use a tripod to avoid camera shaking.
• Macro Shot is not available when Quick Shot is
on.
16
Power zoom "W" button
"%" button
02.8.27, 7:29 PM