Tcp/Ip Control; Control Modes - Kensence KX-HDMI88 User Manual

7. TCP/IP Control

7.1 Control Modes

TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
4001. IP can be changed as you need, Serial Port cannot be changed.
Controlled by single PC

Connect a computer to the TCP/IP port of the Matrix Switcher, and set its network
segment to the same as the default IP of the Matrix Switcher (192.168.0.178).
Controlled by PC(s) in LAN

The Matrix Switcher can be connected with a router to make up a LAN with the PC(s),
this make it able to be controlled in a LAN. When control, just make sure the Matrix
Switcher's network segment is the same with the router. Please connect as the following
figure for LAN control.
4K 8x8 HDMI2.0 Matrix Switcher
Figure 7- 1 Modify the IP of PC
16
Same network
segment as the
switcher