Tcp/Ip Control; Control Modes - Kensence KX-HDMI-44 User Manual

7. TCP/IP Control

7.1 Control Modes

TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
4001. IP can be changed as you need, Serial Port cannot be changed.
 Controlled by single PC
Connect a computer to the TCP/IP port of the Matrix Switcher, and set its network
segment to the same as the default IP of the Matrix Switcher (192.168.0.178).
 Controlled by PC(s) in LAN
The Matrix Switcher can be connected with a router to make up a LAN with the PC(s),
this make it able to be controlled in a LAN. When control, just make sure the Matrix
Switcher's network segment is the same with the router. Please connect as the following
figure for LAN control.
Figure 7- 1 Modify the IP of PC
15
4K 4x4 HDMI2.0 Matrix Switcher
Same network
segment as the
switcher