System Connection; Usage Precautions; Connection Diagram; Connection Procedure - Kensence KX-HDMI88 User Manual

3. System Connection

3.1 Usage Precautions

System should be installed in a clean environment with prop temperature and

humidity.
All of the power switches, plugs, sockets and power cords should be insulated.

All devices should be connected before power on.


3.2 Connection Diagram

Router Laptop
TCP/IP IR IN
1 2 3
DVD

3.3 Connection Procedure

Step1. Connect HDMI sources (e.g. DVD/PS4/Laptop) to HDMI input ports with HDMI
cables;
Step2. Connect HDMI displays (e.g. HDTV/Projector) to HDMI output ports with HDMI
cables;
Step3. Connect speakers/ amplifiers to the SPDIF audio outputs with Toslink cables;
Step4.Connect the RS232 ports of the control device (e.g. Central Control System, PC)
and the Matrix Switcher to enable serial control.
Step5. Insert an IR receiver to the IR IN port to control this switcher via IR Remote.
Step6. Connect the TCP/IP ports of the control device (e.g. Laptop) and the Matrix
4K 8x8 HDMI2.0 Matrix Switcher
Central Control System
CONTROL
Tx Rx
ON DIP
On 1
Off 0
1 2 3 4
R S232 EDID
4 5 6 7
INPUTS
Laptop
Figure 3- 1 Connection diagram
SPDIF SPDIF SPDIF
8 1 2 3
HDTV
4
HDMI:
Audio:
RS232:
Ethernet:
IR Control:
SPDIF SPDIF SPDIF SPDIF
4 5 6 7
OUTPUTS
Projector
SPDIF
8
DC 24V
Speaker