Rs232 Communication Commands; System Commands - Kensence KX-HDMI88 User Manual

Set the parameters (baud rate, data bit, stop bit and parity bit) correctly to ensure
reliable RS232 control.

6.3 RS232 Communication Commands


Case-sensitive.

"[", "]" in the commands are for easy recognition only and not necessary in real

operations. Other symbols including ".", ",", "/", "%", ";", "^". are parts of the
commands.
Feedbacks listed in the column "Feedback Example" are only for reference,

feedbacks may vary according to different operations.
Dial the EDID switcher to "1111" before sending commands pertaining to software

EDID management (with grey background)
Baud rate: 9600

6.3.1 System Commands

Command
/*Type;
/^Version;
Demo.
Undo.
PWON.
PWOFF.
STANDBY.
4K 8x8 HDMI2.0 Matrix Switcher
Data bit: 8
Function
Query the model.
Query the version of firmware
Switch to the "demo" mode, convert
input and output in turn like1B1,
1B2, ...4B3, 4B4, 1B1... and so
on .The switching interval is 2 seconds.
To cancel the current operation.
Work in normal mode.
Enter into standby mode, send the
"PWON." to start.
Enter into standby mode, press other
buttons or send other commands to
Stop bit: 1
10
Parity bit: none
Feedback Example
XXXXX
VX.X.X
Demo Mode
AV:01->01
AV:01->02
AV:01->03
AV:01->04
AV:02->01
...
Normal Mode
Undo Ok!
PWON
PWOFF
STANDBY