Table of Contents
Advertisement
5. IR Control
The Matrix Switcher features one built-in IR receiver to receive IR signal from IR remote
to enable IR control. If the external IR receiver or other IR control device need to be
used, the IR IN port on rear panel can be connected.
Standby button:
1
Press it to enter/ exit standby mode.
INPUTS:
2
Input channel selection buttons, same with the
corresponding front panel buttons
OUTPUTS:
3
Output channel selection buttons, same with the
corresponding front panel buttons.
Menu buttons:
4
ALL: Select all inputs/outputs.
To convert an input to all outputs:
Example: Input 1 to all Outputs:
→ Press INPUTS 1 + ALL + ENTER
EDID management button:
1)
One input port learns the EDID data from one output
port.
Example: Input 2 learns EDID data from output 4:
→ Press EDID + INPUTS 2 + OUTPUTS 4+ ENTER
2)
All input ports learn EDID data from one output port.
Example: All input ports learn EDID data from output 3:
→ Press EDID + ALL + OUTPUTS 3 + ENTER
CLEAR: Withdraw button.
ENTER: Confirm operation.
4K 8x8 HDMI2.0 Matrix Switcher
8
1
INPUTS
1
2
3
2
4
5
6
7
8
OUTPUTS
1
2
3
3
4
5
6
7
8
MENU
ALL
EDID
4
CLEAR
ENTER
Advertisement
Table of Contents
