Rear Panel - Kensence KX-HDMI88 User Manual

2.2 Rear Panel

TCP/IP IR IN
1 2 3
No. Name
INPUTS
1
OUTPUTS
2
Control
3
DC 24V
4
Ground
5

Pictures shown in this manual are for reference only.
4K 8x8 HDMI2.0 Matrix Switcher
3
CONTROL
Tx Rx
ON DIP
On
1
Off 0
1 2 3 4
R S232 EDID
4 5 6 7
INPUTS
1
Figure 2- 2 Rear Panel
Description
HDMI input ports, 8 in total, connect with HDMI
sources.
SPDIF: audio output ports for de-embedded HDMI
audio, 8 in total.
HDMI: 8 in total, connect with HDMI displays.
EDID: 4-pin EDID DIP switchers to set EDID data, "1"
stands for "On", "0" stands for "Off". Refer to 4. 2 EDID
Configurarion for more detials.
RS232: Serial control port, connect with control device.
IR IN: Connects with external IR receiver for using the
IR remote to control the Matrix Switcher.
TCP/IP: TCP/IP port for unit control.
Connect with 24VDC 2.71A power adaptor.
Connect to ground.
SPDIF SPDIF SPDIF
8 1 2 3
3
SPDIF SPDIF SPDIF SPDIF
4 5 6 7
OUTPUTS
2
SPDIF
8
DC 24V
4