Safety Precautions For Inspection And Service; Warning - MINOLTA-QMS PagePro 1200 Series Service Manual

1. SAFETY PRECAUTIONS FOR INSPECTION AND
SERVICE
• When performing inspection and service procedures, observe the following precautions to prevent
accidents and ensure utmost safety.
• Depending on the model, some of the precautions given in the following do not apply.
• Different markings are used to denote specific meanings as detailed below.
• Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe practices.
• The following graphic symbols are used to give instructions that need to be observed.
Used to call the service technician attention to what is graphically represented inside the
marking (including a warning).
Used to prohibit the service technician from doing what is graphically represented inside
the marking.
Used to instruct the service technician to do what is graphically represented inside the
marking.
1-1.

Warning

1. Always observe precautions.
• Parts requiring special attention in this product will include a label containing the mark
shown on the left plus precautionary notes. Be sure to observe the precautions.
• Be sure to observe the "Safety Information" given in the Operator's Manual.
2. Before starting the procedures, be sure to unplug the power cord.
• This product contains a high-voltage unit and a circuit with a large current capacity
that may cause an electric shock or burn.
• The product also contains parts that can jerk suddenly and cause injury.
• If this product uses a laser, laser beam leakage may cause eye damage or blindness.
WARNING
CAUTION
WARNING
5
PagePro 1200 Series Safety