Automatic Data Transfer <Auto; Continuous Data Transfer <Cont - KERN TCKE 300-3-A Operating Instruction

13.2.3 Automatic data transfer <auto>
Data transfer takes place automatically without pressing the PRINT button provided the ap-
propriate transfer conditions are met depending on the menu setting.
Function enabling and transfer condition setting:
 In the setup menu, display the <Print  PrMode> menu item and confirm,
pressing .

To transfer data automatically, using navigation buttons , choose the <auto> menu
item and confirm by pressing .

Use the navigation buttons  to choose the setting <on> and confirm by pressing .
The <zRange> symbol will be displayed.


Confirm by pressing  and use the navigation settings  to set the required transfer
condition.

Confirm pressing .

To leave the menu, press the navigation button  several times.
Placing the weighed material:

Whenever required, place an empty container on the scale and tare it.

Place the weighed material and wait until the stabilization indicator is displayed (
The weighing value will be transferred automatically.
13.2.4 Continuous data transfer <cont>
Function enabling and transfer cycle setting:
In the setup menu, display the <Print  PrMode> menu item and confirm,

pressing .

To transfer data continuously, using navigation buttons , choose the <cont> menu
item and confirm by pressing .

Use the navigation buttons  to choose the setting <on> and confirm by pressing .

The <speed> symbol will be displayed.

Confirm by pressing  and using the navigation buttons, , set the required cycle (for
introducing the numerical value, see chapter 3.2.2).

To leave the menu, press the navigation button  several times.
Place the weighed material.

Whenever required, place an empty container on the scale and tare it.

Place the weighed material.

The weighing values will be transferred in line with the predefined cycle.
38
).
CKE-BA-e-2132