External Adjustment <Calext - KERN TCKE 300-3-A Operating Instruction

Blight
Display illumination
tarerg
Taring range
ztrack
Maintaining zero
reset
11.2.2 External adjustment <CalExt>
 Ensure stable environmental conditions. The heating time is required for the sta-
bilization (see chapter 1).
 Ensure there are no objects on the scales plate.
 To display the setup menu, press and hold TARE and ON/OFF buttons simulta-
neously until the first menu item <Cal> is displayed.
 Press TARE; the <CalExt> symbol will be displayed.
 Confirm, pressing TARE. The first selectable adjustment weight value will be
displayed.
CKE-BA-e-2132
mode
always Display illumination always on
timer
No bl
Time 5 s
10 s
30 s
1 min
2 min
5 min
30 min
100%
Defining the maximum taring range, you can choose 10–

10%
on
If the amount of the weighed material is reduced or in-
creased significantly, the scale's "stabilizing and com-
pensating" mechanism can result in displaying errone-
ous weighing results! (e.g.: slow outflow of the liquid
off
from the container placed on the scale, evaporating pro-
cesses).
When dosing with small weight fluctuations, it is recom-
Reset balance settings to factory settings
Automatic illumination switch-off after
the time defined in <Time> menu
item elapsed with no change of the
load or when not operated
Display illumination always off
Automatic display illumination switch-
off after the preset time elapsed with
no change of the load or when not op-
erated
100%. To enter the numerical value
Automatic maintaining zero [< 3 d]
mended to switch this function off.
27