Basic Instructions (General Information); Intended Use; Non-Intended Use; Warranty - KERN TCKE 300-3-A Operating Instruction

4 Basic instructions (general information)

4.1 Intended use

The scales you bought is intended for weighing the weighed material. It should be
considered a "non-automatic scales", e.g. the weighed material should be carefully
placed manually on the scales plate center. The weight can be read after it has stabi-
lized.

4.2 Non-intended use

The scales is not intended for dynamic weighing, e.g. for removing or adding small
amounts of the weighed material. The scales' "stabilizing and compensating" mecha-
nism can result in displaying erroneous weighing results! (Example: slow outflow of
the liquid from the container placed on the scales.)
Do not subject the plate to long-term load. This may damage the weighing mecha-
nism.
Avoid any scales impact and overload higher than the stipulated maximum load
(Max), deducting the tara from the existing load. This could damage the scales.
Never operate the scales in explosive atmospheres. The standard version is not ex-
plosion-proof.
Never introduce any structural modifications to the scales. This may result in display-
ing erroneous weighing results, violating the technical safety conditions, and also in
scales damage.
The scales should always be operated in line with the provided guidelines. Other op-
eration ranges / areas require a written consent of KERN.

4.3 Warranty

The warranty expires:
• if you fail to follow our guidelines included in the user manual;
• if you fail to use the device in line with the intended use;
• if you introduce any modifications or open the device;
• if the device gets damaged mechanically or damaged by the utilities, liquids and
ordinary wear and tear;
• if the device is not set correctly or the electrical system is not as required;
•
if the weighing mechanism gets overloaded.
12 CKE-BA-e-2132