Counting Mode Overview - KERN TCKE 300-3-A Operating Instruction

11.1 Application menu
The application menu enables fast and targeted access to the selected application.

11.1.1 Counting mode overview

Level 1
Ref
Number of refer-
ence items,
see chapter 9
Ptare
Unit
Units
check
Check counting,
see chapter 10
24
Level 2 Description/chapter
5 Number of reference items 5
10 Number of reference items 10
20 Number of reference items 20
50
Number of reference items 50
Selected arbitrarily; for introducing the numeri-
free
cal value see chapter 3.2.2.
Input unit weight
iNPUT
Taking over the placed weight as the PRE-
actuel
TARE value, see chapter 11.2.4
Entering tara in the numerical form, see chapter
manuel
11.2.5
This function enables to specify the weight unit
g
which is to be used by the scales.
kg
gn
dwt
ozt
oz
lb
Multiplication factor
Free factor
limit
limupp
limlod
The upper limit value of the target
number of pieces; for introducing
the numerical value see chapter
3.2.2
The lower limit value of the target
number of pieces; for introducing
the numerical value see chapter
3.2.2
CKE-BA-e-2132