Data Transfer Functions; Summing Mode <Sum - KERN TCKE 300-3-A Operating Instruction

13.2 Data transfer functions

13.2.1 Summing mode <sum>
This function enables to add individual weighing values to the total memory once the button
is pressed and to print them once connected to an optional printer.
Function enabling:
In the setup menu, display the <Print  sum> menu item and confirm, pressing

.

Use the navigation buttons  to choose the setting <on> and confirm by pressing .

To leave the menu, press the navigation button  several times.
Preliminary condition: Menu setting prmode  manual  on>
Summing the weighed material:

Whenever required, place an empty container on the scale and tare it.

Place the first weighed material. Wait until the stabilization indicator is displayed (
and press PRINT. First <sum1> symbol and then the current weight value will be dis-
played. The weight value will be saved and sent to the printer. The ∑ symbol will be dis-
played. Remove the weighed material.

Place the second weighed material. Wait until the stabilization indicator is displayed (
), and press PRINT. First <sum2> symbol and then the current weight value will
be displayed. The weight value will be saved and sent to the printer. Remove the
weighed material.
 Add the weight of another weighed material to the total, as specified above.

This process may be repeated at any frequency until you reach the scale weighing range.
Displaying and printing the "Total"
 Press and hold the PRINT button. The number of weighing actions and the total
weight will be displayed.
The total memory will be deleted; the [∑] symbol will go off.
36
),
CKE-BA-e-2132