Unpacking, Positioning And Start-Up; Installation Place, Operation Place; Unpacking And Check - KERN TCKE 300-3-A Operating Instruction

7 Unpacking, positioning and start-up

7.1 Installation place, operation place

The scales is designed to ensure reliable weighing results in standard operating con-
ditions.
The choice of a correct scales location ensures its accurate and fast operation.
This is why you should follow the following rules when selecting the installa-
tion place:
• Place the scales on stable, flat surface.
• Avoid extreme temperatures and temperature fluctuations, occurring e.g. when
you place it at the radiator or in a place exposed to direct sun rays.
• Protect the scales from the direct draft present at open windows and doors.
• Avoid impact when weighing.
• Protect the scales from high humidity of air, vapours and dust.
• Do not expose it to long-term heavy moisture. Any forbidden condensation of
the air moisture on the device may occur when a cold device is placed in a
much hotter environment. In such circumstances, leave the device not con-
nected to the mains for 2 hours to adapt to the ambient temperature.
• Avoid static discharge from the weighed material and scales vessel.
If there are any electromagnetic fields, static discharge and unstable power supply,
high readout deviations (erroneous weighing results) may occur. In such circum-
stances, change the location.

7.2 Unpacking and check

Remove the device and accessories from the packaging, remove the packaging ma-
terial and place the device in the target location. Check if all components included in
the delivery are present and not damaged.
Scope of delivery / standard accessories:
• Scales, see chapter 3.1
• Power supply
• User manual
• Dust cover
• Hook for the under-scales weighing hanger / eye
14 CKE-BA-e-2132