Table of Contents
Advertisement
Quick Links
Triple Monitor Desk Stand
Instruction Manual
SKU: STAND-V003FG
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003fg
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V003FG
Summary of Contents for Vivo STAND-V003FG
- Page 1 Triple Monitor Desk Stand Instruction Manual SKU: STAND-V003FG Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003fg GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 22 lbs Failure to do so may result in serious injury. (10 kg) PER ARM Phillips Screwdriver ASSEMBLY STEPS STEP 1 Attach Rubber Feet (F) to the underside of the Glass Base (B). Attach Soft Pad (E) to the Pole (A). Use a screwdriver to poke holes for screws through the Pad.
- Page 4 STEP 2 Install Arm (C) to the Pole (A). Secure using M8x10mm Screws (S-C) with a Phillips screwdriver. STEP 3a - Flat Back Monitors OPTION A: Flat Back Monitor Attach the Center VESA Plates (K) to the monitors you intend to mount in the center of the mount. Attach Side VESA Plates (J) to remaining monitors.
- Page 5 STEP 3b - Curved/Recessed Back Monitors Attach the Center VESA Plates (K) to the monitors you intend to mount in the center of the mount. Attach Side VESA Plates (J) to remaining monitors. Secure using M4 Spacers (M-C), M4x30mm Screws (M-B) and a Phillips screwdriver. Center VESA Plate (K) Installation Side VESA Plate (J) Installation STEP 4...
- Page 6 STEP 4 Slide the outer monitors onto Outer VESA Heads (C2). Secure with Security Nut (S-D). Adjust Monitor Tilt Pry off Plastic Covers (C3) from the Outer VESA Heads (C2). The exposed nut on the side is used to adjust the tilt. Tighten the nut using Wrench (T-D) to adjust.
- Page 7 Adjust Monitor Height To adjust center monitor height, turn the screw behind Center Head (C1) using the 5mm Allen Wrench (T-B). To level the side monitors, remove the Security Nut (S-F) and turn the inner bolt with the 3mm Allen Wrench (T-A) to raise or lower the monitor.
- Page 8 ): 1HR 8M within office hrs - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003FG and is the answer not in the manual?
Questions and answers