Advertisement
Quick Links
Triple Vertical Monitor Desk Stand
Instruction Manual
SKU: STAND-V003D
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003d
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V003D
Summary of Contents for Vivo STAND-V003D
- Page 1 Triple Vertical Monitor Desk Stand Instruction Manual SKU: STAND-V003D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003d GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Tools Needed
TOOLS NEEDED 22 lbs DO NOT EXCEED WEIGHT CAPACITY. Per Arm Failure to do so may result in serious injury. (10 kg) Phillips Drill Screwdriver ASSEMBLY STEPS STEP 1 Remove the grub screws with provided Allen wrench (H). Connect the poles (A) by threads. Install the previously removed grub screws and fasten them with the Allen wrench (H). - Page 4 STEP 3 Install Monitor Arm (C) to the Pole (A). Fasten the bolt with supplied Allen Wrench (H). Attach the Wire Clip (G) to the Pole (A). STEP 4 OPTION A: Flat Back Monitor For monitors with flat backs attach VESA plate (D) using M4x12 Thumb Bolts (J).
- Page 5 STEP 4 (Continued) OPTION B: Curved Back Monitor For monitors with curved or recessed backs attach VESA plate using M4x30 Bolts (K) and M4 Spacers (L).
- Page 6 STEP 4 Slide the monitor onto the head of Monitor Arm (C) as shown in the diagram. Install the M4x6 Bolt (E). Make sure the bolt is installed before you rotate the monitor.
- Page 7 STEP 5 Fasten the grub screw in Monitor Arm to fix the tilting angle by provided Allen Key (M). Manage the wires as in the diagram. grub scre w...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003D and is the answer not in the manual?
Questions and answers