Pneumatic arm dual monitor and laptop desk mount (8 pages)
Summary of Contents for Vivo STAND-V003FG
Page 1
Triple Monitor Desk Stand Instruction Manual SKU: STAND-V003FG Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003fg help@vivo-us.com www.vivo-us.com 1-800-371-5654...
Page 2
TOOLS NEEDED WARNING! DO NOT EXCEED WEIGHT CAPACITY. 22 lbs Failure to do so may result in serious injury. (10 kg) If you do not understand these directions, or if you have any doubts about the safety of the PER ARM installation, please call a qualified technician.
Page 3
STEP 1 (Continued) STEP 3 OPTION C: Self Drilled Grommet Base Installation OPTION A: Flat Back Monitor Position the Pole (a) on the mounting surface and mark the center hole. Drill a 3/8” (10mm) diameter Fasten the VESA plates (u, v) to monitors using thumbscrews (q). Do not overtighten; thumbscrews hole at the marked position through the mounting surface.
Page 4
STEP 4 STEP 5 Manage cables for side monitors using the cable clips. Cables can also be hidden inside the pole. To Adjust the tilt and swivel. Use the Allen Key (o) to adjust swivel joint tension. Use the wrench (p) to adjust swivel joints, remove the plastic cover, then use the 6mm Allen key (o) to turn the bolt.
Page 5
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the STAND-V003FG and is the answer not in the manual?
Questions and answers