Table of Contents
Advertisement
Quick Links
Triple Vertical Monitor Desk Mount
Instruction Manual
SKU: STAND-V003V
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003v
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-V003V
Summary of Contents for Vivo STAND-V003V
- Page 1 Triple Vertical Monitor Desk Mount Instruction Manual SKU: STAND-V003V Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003v GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
- Page 3 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. 33 lbs Failure to do so may result in serious injury. (15 kg) PER ARM Phillips Drill Screwdriver ASSEMBLY STEPS PRE-ASSEMBLY Thread the Pole Set (A) together as shown below. STEP 1 Option A: Desk Clamp Install Install the clamp brace (C) to the pole (A) using x3 M5x14 bolts (F).
- Page 4 STEP 1 (Continued) Option B: Grommet Install If desk does not have an existing grommet hole, drill a 3/8” (10mm) diameter hole at the desired position through the mounting surface. Completely disassemble clamp (B) into individual parts. Set knob (B1) and clamp plate (B2) aside for later use.
- Page 5 STEP 3 OPTION A: Flat Back Monitor For flat back monitor, install VESA Plate (E) to monitor using thumbscrews (N). NOTE: Hand tighten screws to avoid over tightening. OPTION B: Curved Back Monitor For curved back monitor, install VESA Plate (E) to monitor using bolts (O) and spacers (P).
- Page 6 STEP 4 Slide the monitor onto the head of Monitor Bracket (D) as shown in the above diagram. Install the M4x6 Bolt (H). Make sure the bolt is installed before you rotate the monitor.
- Page 7 STEP 5 Fasten the grub screw in Monitor Bracket to fix the tilting angle by provided Allen Key (M). Manage the wires as shown in the diagram below. grub scre w...
- Page 8 - 92% within < 3hr www.vivo-us.com AVG. RESOLUTION TIME : < 15 M (within office hrs) Chat live with an agent! 309-278-5303 AVG. RESOLUTION TIME : 5M 4S (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V003V and is the answer not in the manual?
Questions and answers