Vivo STAND-V003E Instruction Manual
  1. Manuals
  2. Brands
  3. Vivo Manuals
  4. Racks & Stands
  5. STAND-V003E
  6. Instruction manual

Vivo STAND-V003E Instruction Manual

Triple monitor desk stand
Hide thumbs Also See for STAND-V003E:
Table of Contents

Advertisement

Quick Links

Download this manual
Triple Monitor Desk Stand
Instruction Manual
SKU: STAND-V003E
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v003e
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAND-V003E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vivo STAND-V003E

Summary of Contents for Vivo STAND-V003E

  • Page 1 Triple Monitor Desk Stand Instruction Manual SKU: STAND-V003E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003e GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
  • Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 3 TOOLS NEEDED 17.6 lbs DO NOT EXCEED WEIGHT CAPACITY. Per Arm Failure to do so may result in serious injury. (8kg) Phillips Screwdriver ASSEMBLY STEPS STEP 1 Attach Bottom Pole (E) to Base (D) using M6x14mm Screws (S-A) and 4mm Allen Wrench (T-B). STEP 2 Slide one Cable Clip (H) and Arm (C) onto Bottom Pole (E).
  • Page 4 STEP 3 Thread Pole Connector (G) onto Bottom Pole (E). Thread Top Pole (F) into Pole Connector (G). Tighten the set screws on Pole Connector (G) using 3mm Allen Wrench (T-A). STEP 4 Slide one Cable Clip (H) and Bracket (B) onto Top Pole (F) and secure Bracket (B) at the desired height using 6mm Allen Wrench (T-C).
  • Page 5 STEP 5 OPTION A: Flat Back Monitor For flat back monitors, install VESA Plate (A) to the monitor using M4x12mm Screws (M-A) or M5x12mm Screws (M-C) and M5 Washers (M-E). OPTION B: Curved Back Monitor For curved back monitor, align Spacers (M-F) with mounting holes in the monitor and secure VESA Plate (A) to the monitor using M4x16mm Screws (M-B) or M5x16mm Screws (M-D) and M5 Washers (M-E).
  • Page 6 STEP 7 Secure VESA Plates (A) on Arm (C) using Height Adjustment Knobs (I) and M3x8mm Screws (S-B). Assemble VESA Plate (A) to Bracket (B) using Thumbscrew (S-C). Adjust the tilt using 6mm Allen Wrench (T-C). STEP 8 Manage cables using cable management clips on Arm (C) and Cable Clips (H).
  • Page 7 STEP 9 Store Allen Wrenches (T-A, T-B and T-C) in cable management clips (H) for future adjustments. STEP 10 Level the side monitors by loosening Height Adjustment Knobs (I) using 6mm Allen Wrench (T-C). +45 ° ±180 ° -45° +45 ° ±180 °...
  • Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents