Safety, Quality And Performance Standards - Integra OPTIMA T10 1K User Manual

Table of Contents

Advertisement

3. SAFETY, QUALITY AND PERFORMANCE STANDARDS

SAFETY - LOW VOLTAGE DIRECTIVE (2006/95/EC)
UPS Part 1-1: General & Safety UPS in accessible areas
ELECTROMAGNETIC COMPATIBILITY - EMC DIRECTIVE (2004/108/EC)
UPS, Part 2, Electromagnetic Compatibility:
Low Freq. Conducted Disturbances & Signals:
Electrostatic discharge immunity Test:
Radiated radio Frequency immunity:
Electrical Fast Transient / burst immunity:
Surge immunity:
Conducted Immunity:
Power frequency magnetic field immunity:
Voltage Dips, Short Interruptions & Voltage Variations Immunity:
PERFORMANCE: UPS Part 3: Methods of operation, specs and test requirement
IT Equipment. SAFETY. Part 1: General Requirements
BATTERY SAFETY
UL1778 & CSA C22.2 (for 120V UL models only)
FCC Part 15 (for 120V UL models only)
IP PROTECTION
QUALITY MANAGEMENT:
ENVIRONMENTAL MANAGEMENT:
TRANSPORTATION:
WARNING: Modifications made on the product or the use of this product as a part of a more complex system not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. It also could affect its performance and the compliance of
regulations. XMART is not responsible of modifications made after manufacturing.
WARNING: This is a category C2 UPS product. In a residential environment, this product may cause radio interference, in which case the user
may be required to take additional measures (only for 220/230/240VAC systems).
NOTE FOR 110/120 VAC SYSTEMS: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.
www.xmart-ups.com
USER MANUAL - OPTIMA T10 1K/1.5K/2K/3K
VER.2310.26-One (ENG)
IEC/EN 62040-1
IEC/EN 62040-2
IEC/EN 61000-2-2
IEC/EN 61000-4-2 (Level 3)
IEC/EN 61000-4-3 (Level 3)
IEC/EN 61000-4-4 (Level 4)
IEC/EN 61000-4-5 (Level 4)
IEC/EN 61000-4-6
IEC/EN 61000-4-8
IEC/EN 61000-4-11
IEC/EN 62040-3
IEC/EN 60950-1
EN 50272
UL1778 & CSA C22.2 (by cTUVus)
FCC Part 15 Class A
IP21 (static)
Manufactured under: ISO 9001 : 2008
Manufactured under: ISO 14001 : 2015
IEC/EN 60068-2-32 (Drop Test)
IEC/EN 60068-2-64 (Vibration Test)
IEC/EN 60068-2-27 (Shock Test)
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optima t10 1.5kOptima t10 2kOptima t10 3k

Table of Contents