Problems And Errors - Hisense BI6062HIXUK Instructions For Use Manual

10. Problems and errors

During the warranty period, only a service centre authorized by the manufacturer may carry out
any repairs.
Before making any repairs, make sure the appliance is disconnected from the power mains either by
removing the fuse or by disconnecting the power plug from the wall outlet.
Any unauthorized repairs of the appliance may result in electric shock and short circuit hazard; therefore,
do not perform them. Leave such work to an expert or a service technician.
In case of minor problems with appliance operation, check this manual to see if you can fix the problem
yourself.
Save the instructions for future reference and pass them on to any subsequent owners or users of the
appliance.
Following are some troubleshooting tips.
Problem/error
The main fuse in your home trips
often.
Continuous beep and display
F on the display
If the problems persist despite observing the above advice, call an authorized service technician.
Repair or any warranty claim resulting from incorrect connection or use of the appliance shall not be
covered by the warranty. In this case, the user will cover the cost of repair.
WARNING!
Before the repair, disconnect the appliance from the power mains (by removing the fuse or by
removing the plug from the wall outlet).
Cause
Call a service technician.
Water spilt over the sensor surface, or an object placed over
the sensors.
Wipe the sensor surface.
This indicates that there has been an error during operation.
Disconnect the appliance from the power mains for a few
minutes (undo the fuse or switch off the main switch); then,
reconnect the appliance and switch it on.
31