Connecting the power cord to the power mains
(appliance with a power cord)
•
The cooking hob has to be hard-wired directly to the power mains.
•
Devices for disconnecting from the power mains have to comply with the relevant regulations.
•
Do not extend the power cord and do not lead it over sharp edges.
•
If the appliance is installed above an oven, make sure the power cord is never in contact with the
oven's hot parts.
Single-phase
connection
Single-phase connection
Connect the hob as shown in
Diagram A. If your power mains
do not allow a 32 A fuse, the
appliance power should be
decreased or limited
accordingly.
Connecting a 30-cm appliance
1. Open the cover of the connection terminal box.
2. Connect the wires according to your type of appliance.
3. Run the power cord through a cord strain relief (clamp) that protects the cable from being pulled
out.
Connection diagram
Two-phase connection
Two-phase connection
If your electric mains have 2 line
conductors and 1 neutral
conductor, connect the
appliance as shown in Diagram
B.
Connecting the power cord to the power mains
(appliance with a power cord)
L, L1 = brown
L2 = black
N, N1 = grey
= yellow and green
If your electric mains have 2 line
conductors and 2 neutral
conductors, connect the
appliance as shown in Diagram
C.
only for NL!
15