Table of Contents
Advertisement
1. Silicone sealant
2. Sealing tape
Stone countertop
WARNING!
Pay particular attention to built-in dimensions with (natural) stone countertops. When choosing
the silicone sealant, observe the countertop material and consult the countertop manufacturer.
Use of inappropriate silicone sealants can result in permanent discolouration of some parts.
Given the margin of error (tolerance) for the glass ceramic plate of the appliance, and the cutout in
the countertop, the slot is adjustable (min.2 mm).
1. First, feed the power cord through the cut-out.
2. Place the appliance over the centre of the
cut-out.
3. Connect the appliance to the power mains.
4. Test appliance operation.
5. Seal the slot between the appliance and the
countertop using a silicone sealant. The silicone
sealant used to seal the appliance has to be
temperature-resistant (to at least 160 °C).
6. Smooth out the silicone sealant using a
suitable tool. Do not switch on the appliance until
the silicone sealant has dried completely.
1. Countertop
2. Appliance
3. Slot
11
Advertisement
Table of Contents
