Removing And Replacing The Hard Disk - Epson ActionNote 866C User Manual

Caution
Do not change the setting of a PC memory card's
write-protect switch while the card is installed in the
computer or you may damage the card. First eject the card,
then change the switch setting and reinsert it.
When you want to remove the PC card, check the PC card
indicator light to verify that the computer is not accessing the
card. If you are using a LAN card, you may also want to log
out. Then press the appropriate release button to eject the card
and store it properly in the case that came with it.
See Chapter 2 for instructions on configuring your PC card(s).

Removing and Replacing the Hard Disk

If you want to install a higher capacity hard disk drive in your
ActionNote or remove the existing drive for service, you can
follow the instructions below. You should not need any tools.
Your ActionNote supports hard disk drives that have a 2.5-inch
form factor and a standard IDE interface, with a maximum
height of 19 mm.
Caution
Before you replace your hard disk drive, be sure to make
backup copies of all your files and programs. Use the
MWBACKUP utility in the Windows Applications group or
the MS-DOS BACKUP command. Refer to the Windows
Help utility for instructions on using MWBACKUP; use the
MS-DOS help utility for instructions on using BACKUP.
4-6 Installing Optional Devices