Making Backup Copies Of Your Files; Running The Setup Program - Epson ActionNote 866C User Manual

Making Backup Copies of Your Files

Before you start using your computer, it's a good idea to make
a backup copy of your hard disk drive. Use the MWBACKUP
utility in the Windows Applications group or the MS-DOS
BACKUP command to back up the contents of the drive. Refer
to the Windows Help utility for instructions on using
MWBACKUP; use the MS-DOS help utility for instructions on
using BACKUP.
You should make backup copies of any diskettes you have that
contain programs and store the copies away from your
originals. Also be sure to regularly back up your hard disk
drive to preserve the files and programs you store there.
Your hard disk drive includes a C:\ BACKUP directory
containing important system configuration files. If you need to
restore the original versions of these files, use DOS or the
Windows File Manager to copy them from the BACKUP
directory. Copy CONFIG.SYS and AUTOEXEC.BAT to C:\
Copy *.INI to C:\ WINDOWS.

Running the Setup Program

The Setup program defines your system's configuration so the
computer recognizes all of its devices. The Setup program is
stored in the computer's ROM (read only memory), where you
can access it any time you turn on or reset the computer.
The configuration you define through Setup is stored in a
special area of memory, which is backed up by a battery and is
not erased when you turn off or reset the computer.
Setting Up the Computer 1-9