External Pointing Device Problems - Epson ActionNote 866C User Manual

External Pointing Device Problems

If your external keyboard, mouse, or other PS/ 2 compatible
pointing device does not work properly, try these solutions:
1. Did you install any necessary drivers and load them into
your computer's memory? See the documentation that
came with your device for instructions.
2. Your computer's built-in trackpad is automatically disabled
when a device is connected to the external keyboard/
mouse port. If you connect a pointing device to the serial
port, you must disable the built-in trackpad through Setup.
See Chapter 1 for instructions.
3. Is the external device connected properly? Make sure you
connected it to the external keyboard/ mouse port before
you turned on the computer, as described in Chapter 4.
4. If the device is connected to the computer's serial port, make
sure the device and the Serial port option in Setup are
set to use the same memory address or COM port. See
Chapter 1 for more information.
5. If you still have trouble with an external device, check the
manual that came with it or contact the manufacturer.
Troubleshooting
5 - 1 1