Running Tests - Epson ActionNote 4SLC/33 User Manual

Running Tests

Follow these steps to run a test from the Execute menu:
1. Press
Execute menu, such as the following:
System Board
Numeric Coprocessor
system Memory
Diskette Drive A
Hard Disk Drive #1
Serial Port COM1
Serial Port COM2
Printer Port LPT1
Video Adapter Test
Keyboard Test
2. Press
test and press
H o w
3.
If you want to run the test once, press
more than once, type the number of times and press
4. If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE (S) AND CONTROLLER CHECK MENU
1 -
2 -
3 -
4 -
0 -
or to select Execute. You see the
or to highlight the device you want to
You see the Repeat prompt:
o f t e n t o
Seek check
Write, read check
Read, verify check
Run all above checks
Exit
r e p e a t t e s t ?
Running System Diagnostics 6-5
1
To run the test