Using Vgaconf From The Command Line - Epson ActionNote 4SLC/33 User Manual

Select Timer to set a timeout period, or select Normal to
disable standby mode. When you select Timer, you see these
prompts:
Standby Time (minutes):
Time-out on (K)eyboard activity or (M)emory
a c c e s s
Enter the number of minutes to wait before entering standby
mode and press
activity. If you enter K, the LCD panel will enter standby mode
if there is no keyboard activity for the specified number of
minutes. If you enter M, the LCD panel will enter standby mode
if video memory is not accessed for the specified number of
minutes. Press
The standby mode initiated by the VGACONF utility is exactly
the same as Suspend mode. You can reactivate the system at
any time by pressing the
Select Quit to exit the VGACONF program and return to the
operating system prompt.
VGACONF
Using
To quickly change one or more VGA configuration settings,
you can initiate VGACONF from the command line with
option parameters. At the command prompt, enter the
VGACONF command in the following format:
VGACONF [options]
( K / M ) :
Then enter K or M to indicate the type of
to initiate the timer.
key.
From the Command Line
Using the VGA Utilities 7-9