Microsoft Windows, Version 3.0 - Epson ActionNote 4SLC/33 User Manual

11. At the installation menu, select save changes.
12. At the prompt, enter a name that identifies this driver; it's
a good idea to include the driver's resolution, 100 x 60. The
default driver name assigned by the program is 123.SET.
13. Exit the Lotus Install program.
To start Lotus with the new driver resolution, you include the
name of the driver with the Lotus prompt. For example, if you
named your driver 100 x 60.SET, you would type the following
and press
123 100 x 60

Microsoft Windows, Version 3.0

The Microsoft Windows driver supports a resolution of
800 x 600 with 16 colors.
Note
Even though this driver is specific to Windows 3.0, you can
use it with Windows version 3.1. Check with the Epson
Connection for the availability of the Windows 3.1 driver.
To install the driver, follow these steps:
1. Log onto the Windows directory on your hard disk.
2. At the command prompt, type SETUP and press
3. At the System information screen, select Display and
press
7-4 Using the VGA Utilities