Epson ActionNote 4SLC/33 User Manual page 30

If the tests indicate a problem with the system, you will see an
error message followed by this prompt:
RUN SETUP UTILITY
Press <F1> to RESUME
If this happens, press
check your system configuration. See Chapter 5 for a complete
description of the Setup program.
When the computer completes its testing, it displays a screen
describing the system's configuration
If necessary, press the
the configuration screen. After viewing the screen, press any
key to continue the startup process.
Because your computer was set up at the factory, the
configuration information should be accurate. If you have
changed the computer's setup so that this information does not
match your configuration, run the Setup program described in
Chapter 5 to correct it.
Depending on your configuration, your computer may come
with MS-DOS and Microsoft Windows installed on the hard
disk. However, you can use another operating system, such as
®
OS/2, UNIX,
sample MS-DOS commands, it does not explain how to use the
operating system; see your MS-DOS or other operating system
manuals for complete instructions.
1-12 Setting Up the Computer
® ®
or XENIX. Although this manual includes
to run the Setup program and
button on the keyboard to view